*High Range Only* – Free Sulfur Dioxide (SO2) Test Kit

From: $59.50

  • Can be used for both red and white wines, and require NO adjustments or pretreatments. The test formula has been adjusted to accommodate colored samples
  • Get an accurate measurement of FREE sulfur dioxide, something critical to make sure your wine will be stable enabling proper aging
  • Total sulfur dioxide present in must and wine is not as useful as a preservative as just free sulfur dioxide, as total SO2 is equal to free + bound. THIS TEST ONLY MEASURES FREE SO2.
  • No instrumentation or equipment needed for accurate results – just what comes in the package
  • No sample prep required, enabling you to get actionable results in a matter of minutes!
Part Number: 303-1 Category:

Description

This test solely measures FREE sulfur dioxide. Total sulfur dioxide present in must and wine is not as useful as a preservative as just free sulfur dioxide, as total SO2 is equal to free + bound. The portion of total SO2 that is bound to other chemical components has reduced effectiveness as a preservative by 30 – 70%, and as such free SO2 is a much more useful figure in winemaking. Also, the degree of binding can change over time, affecting the ability of an adequate dose to continue providing its preservative properties. The effectiveness of sulfur dioxide as a preservative is also pH-dependent, with low pH wines requiring lower levels, and high pH wines requiring significantly greater concentrations to achieve the same effectiveness as in a typical wine with a pH of 3.3 – 3.4.

 

This Accuvin Free SO2 test kit contains ONLY High Range (40-130 ppm) tests. Each test kit contains the number of tests, tubes with rehydration solution, and samplers that correspond to the size of the kit.

 

Click here for more documentation on the Free SO2 Test Kit

You can learn more about the Accuvin wine tests and how they all work together here.

 

Additional information

Weight 0.1 lbs
Dimensions N/A
Tests Per Kit

10, 20, 50, 100

Frequently Asked Questions (FAQ)

How can I make sure I am getting the most accurate results possible?

For best accuracy, we recommend interpreting results directly in person using the procedure below:
-Hold the tube approximately 1 inch (2.5 cm) above a white background (such as a sheet of paper)
-Read results under natural daylight or incandescent lighting
-Fluorescent lighting has a green cast and can distort color matching